Flagpole Internal Halyard Hardware

Internal Halyard Trucks

Aluminum Fixed Type

Description

Type

O.D.

Price

Sale


Cast aluminum construction with cast nylon pulley on 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws. The top of the truck is designed to accept an ornament with a spindle threading of 1/2" as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4-20NC stainless steel pan head screw. The recommended maximum halyard diameter is 5/16".

Cap Type

Fixed

$45.00

Cap Type

Fixed

3 1/2"

$64.00

Cap Type

Fixed

$70.00

Aluminum Revolving Type

Description

Type

O.D.

Price

Sale


Cast aluminum construction with cast nylon pulley on 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws. The top of the truck is designed to accept an ornament with a spindle threading of 1/2" as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4-20NC stainless steel pan head screw. The recommended maximum halyard diameter is 5/16".

1 1/4" Cable

Revolving

$180.00

1 1/4" Rope

Revolving

$180.00

Large

Revolving

$330.00

Fiberglass Fixed Type

for 25' - 40' poles for rope and cam cleat.

Description

Type

O.D.

Price

Sale


Cast aluminum construction with cast nylon pulley on 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws. The top of the truck is designed to accept an ornament with a spindle threading of 1/2" as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4-20NC stainless steel pan head screw. The recommended maximum halyard diameter is 5/16".

Single Sheave

Fixed

$35.00

for 50' - 60' poles for cable.

Single Sheave

Revolving

$250.00

Revolving Top Pole Adapter

Type

O.D.

Price

Sale


These adapters are used in monting a truck that has a spindle threading of 1 1/4" NPT and the pole does not have a threaded top plug installed. The adapter is tapped 1 1/4" NPT and is designed to slip over the top of the pole and is secured by three 1/4"-20NC stainless steel set screws.